How to Fix HP Laptop Windows Error Recovery?

Hp Laptop is widely used among the users. It runs without any interruption but due to some technical issue some users may face the issue such as Installation Problem, Virus Scan and Malware Removal, Mail Setup and configuration settings, slow running etc. But no need to worry because we are very delighted to announce that the tech support has been started in Australia.

The customer using HP Laptop in Australia region are informed that if they are facing any HP recovery error they may feel free to get in touch with hp technical support. The technicians deals the issue via remote access technology method in which they are required to share the computer screen with the technicians and then they provide the accurate solutions as per the customer need and choice. The charges charged are very nominal and will be charged only after fixing the issue completely.

The following error can be displayed when starting a computer:

Remove the added hardware:

Step 1: Turn off the computer and unplug the power cord.

Step 2: Disconnect all non-essential peripherals attached such as a printer, scanner, webcam, zip drive, phone cord, network cable, and other devices. Leave only the mouse, keyboard, and monitor cable attached.

Step 3: Press and hold the power button on the front of the computer. Release after 5 seconds.

Step 4: Plug the power cord back in.

Step 5: Turn on the computer.

Step 6: The monitor displays the message again. Allow the timer to count down to zero.

Step 7: If the error opens again, skip to the next step and you can continue connecting the devices, one at a time, restarting the computer each time, until you find the device that is causing the error. Do not use the device that causes the error.

Try to repair Windows files:

Use the following steps to clean the Windows problem:

Step 1: Firstly, click on the error screen box and click on “Launch Start Repair” (recommended) tab.

Step 2: Now the Startup Repair window will be open and automatically scans for startup problems.

Step 3: The users may now perform the prompts provided by Startup Repair to correct the damaged or missing files, or any other action.

Step 4: If the error still displayed then continue to the next step to use System Restore.

Restore Windows to an earlier date and time:

Step 1: Firstly, turn off the computer.

Step 2: Then require removing all attached devices except the mouse, keyboard, and monitor.

Step 3: Now switch on the computer and press the F8 key repeatedly till a windows startup screen is displayed.

Step 4:After this use the Up and Down arrow key to highlight Safe Mode with Command Prompt and then press Enter.

Step 5:Select the “Administrator” tab from login screen and type the password (if applicable).

Step 6:When the command window is displayed, type the following at the command prompt, and press Enter

Step 7:At the new prompt, type the following as “rstrui” and press Enter and then System Restore screen opens. Click to select different restore point, and then click Next option.

Step 8: Follow the on-screen instructions to restore the computer to a time when the errors did not occur.

Step 9: At last, after these steps the computer restarts and tries to open Windows.

So, for any other issue the customers are required to dial the HP toll free number where they will interact with the world class technicians who are best as per the industry with well talent and qualified in tech support. The HP support phone number is available 24 hours whole year without a single stop.